[net-analyzer/zabbix] forgot some stuff

net-analyzer/zabbix/files/3.0/zabbix_proxy.conf

@@ -0,0 +1,674 @@
+# This is a configuration file for Zabbix proxy daemon
+# To get more information about Zabbix, visit http://www.zabbix.com
+
+############ GENERAL PARAMETERS #################
+
+### Option: ProxyMode
+#	Proxy operating mode.
+#	0 - proxy in the active mode
+#	1 - proxy in the passive mode
+#
+# Mandatory: no
+# Default:
+# ProxyMode=0
+
+### Option: Server
+#	IP address (or hostname) of Zabbix server.
+#	Active proxy will get configuration data from the server.
+#	For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: yes (if ProxyMode is set to 0)
+# Default:
+# Server=
+
+Server=127.0.0.1
+
+### Option: ServerPort
+#	Port of Zabbix trapper on Zabbix server.
+#	For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# ServerPort=10051
+
+### Option: Hostname
+#	Unique, case sensitive Proxy name. Make sure the Proxy name is known to the server!
+#	Value is acquired from HostnameItem if undefined.
+#
+# Mandatory: no
+# Default:
+# Hostname=
+
+Hostname=Zabbix proxy
+
+### Option: HostnameItem
+#	Item used for generating Hostname if it is undefined.
+#	Ignored if Hostname is defined.
+#
+# Mandatory: no
+# Default:
+# HostnameItem=system.hostname
+
+### Option: ListenPort
+#	Listen port for trapper.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# ListenPort=10051
+
+### Option: SourceIP
+#	Source IP address for outgoing connections.
+#
+# Mandatory: no
+# Default:
+# SourceIP=
+
+### Option: LogType
+#	Specifies where log messages are written to:
+#		system  - syslog
+#		file    - file specified with LogFile parameter
+#		console - standard output
+#
+# Mandatory: no
+# Default:
+# LogType=file
+
+### Option: LogFile
+#	Log file name for LogType 'file' parameter.
+#
+# Mandatory: no
+# Default:
+# LogFile=
+
+LogFile=/var/log/zabbix/zabbix_proxy.log
+
+### Option: LogFileSize
+#	Maximum size of log file in MB.
+#	0 - disable automatic log rotation.
+#
+# Mandatory: no
+# Range: 0-1024
+# Default:
+# LogFileSize=1
+LogFileSize=128
+
+### Option: DebugLevel
+#	Specifies debug level:
+#	0 - basic information about starting and stopping of Zabbix processes
+#	1 - critical information
+#	2 - error information
+#	3 - warnings
+#	4 - for debugging (produces lots of information)
+#	5 - extended debugging (produces even more information)
+#
+# Mandatory: no
+# Range: 0-5
+# Default:
+# DebugLevel=3
+
+### Option: PidFile
+#	Name of PID file.
+#
+# Mandatory: no
+# Default:
+# PidFile=/tmp/zabbix_proxy.pid
+PidFile=/run/zabbix/zabbix_proxy.pid
+
+### Option: DBHost
+#	Database host name.
+#	If set to localhost, socket is used for MySQL.
+#	If set to empty string, socket is used for PostgreSQL.
+#
+# Mandatory: no
+# Default:
+# DBHost=localhost
+
+### Option: DBName
+#	Database name.
+#	For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored.
+#	Warning: do not attempt to use the same database Zabbix server is using.
+#
+# Mandatory: yes
+# Default:
+# DBName=
+
+DBName=zabbix_proxy
+
+### Option: DBSchema
+#	Schema name. Used for IBM DB2 and PostgreSQL.
+#
+# Mandatory: no
+# Default:
+# DBSchema=
+
+### Option: DBUser
+#	Database user. Ignored for SQLite.
+#
+# Default:
+# DBUser=
+
+DBUser=zabbix
+
+### Option: DBPassword
+#	Database password. Ignored for SQLite.
+#	Comment this line if no password is used.
+#
+# Mandatory: no
+# Default:
+# DBPassword=
+
+### Option: DBSocket
+#	Path to MySQL socket.
+#
+# Mandatory: no
+# Default:
+# DBSocket=/tmp/mysql.sock
+
+# Option: DBPort
+#	Database port when not using local socket. Ignored for SQLite.
+#
+# Mandatory: no
+# Default (for MySQL):
+# DBPort=3306
+
+######### PROXY SPECIFIC PARAMETERS #############
+
+### Option: ProxyLocalBuffer
+#	Proxy will keep data locally for N hours, even if the data have already been synced with the server.
+#	This parameter may be used if local data will be used by third party applications.
+#
+# Mandatory: no
+# Range: 0-720
+# Default:
+# ProxyLocalBuffer=0
+
+### Option: ProxyOfflineBuffer
+#	Proxy will keep data for N hours in case if no connectivity with Zabbix Server.
+#	Older data will be lost.
+#
+# Mandatory: no
+# Range: 1-720
+# Default:
+# ProxyOfflineBuffer=1
+
+### Option: HeartbeatFrequency
+#	Frequency of heartbeat messages in seconds.
+#	Used for monitoring availability of Proxy on server side.
+#	0 - heartbeat messages disabled.
+#	For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: no
+# Range: 0-3600
+# Default:
+# HeartbeatFrequency=60
+
+### Option: ConfigFrequency
+#	How often proxy retrieves configuration data from Zabbix Server in seconds.
+#	For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: no
+# Range: 1-3600*24*7
+# Default:
+# ConfigFrequency=3600
+
+### Option: DataSenderFrequency
+#	Proxy will send collected data to the Server every N seconds.
+#	For a proxy in the passive mode this parameter will be ignored.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# DataSenderFrequency=1
+
+############ ADVANCED PARAMETERS ################
+
+### Option: StartPollers
+#	Number of pre-forked instances of pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPollers=5
+
+### Option: StartIPMIPollers
+#	Number of pre-forked instances of IPMI pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartIPMIPollers=0
+
+### Option: StartPollersUnreachable
+#	Number of pre-forked instances of pollers for unreachable hosts (including IPMI and Java).
+#	At least one poller for unreachable hosts must be running if regular, IPMI or Java pollers
+#	are started.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPollersUnreachable=1
+
+### Option: StartTrappers
+#	Number of pre-forked instances of trappers.
+#	Trappers accept incoming connections from Zabbix sender and active agents.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartTrappers=5
+
+### Option: StartPingers
+#	Number of pre-forked instances of ICMP pingers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartPingers=1
+
+### Option: StartDiscoverers
+#	Number of pre-forked instances of discoverers.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartDiscoverers=1
+
+### Option: StartHTTPPollers
+#	Number of pre-forked instances of HTTP pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartHTTPPollers=1
+
+### Option: JavaGateway
+#	IP address (or hostname) of Zabbix Java gateway.
+#	Only required if Java pollers are started.
+#
+# Mandatory: no
+# Default:
+# JavaGateway=
+
+### Option: JavaGatewayPort
+#	Port that Zabbix Java gateway listens on.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# JavaGatewayPort=10052
+
+### Option: StartJavaPollers
+#	Number of pre-forked instances of Java pollers.
+#
+# Mandatory: no
+# Range: 0-1000
+# Default:
+# StartJavaPollers=0
+
+### Option: StartVMwareCollectors
+#	Number of pre-forked vmware collector instances.
+#
+# Mandatory: no
+# Range: 0-250
+# Default:
+# StartVMwareCollectors=0
+
+### Option: VMwareFrequency
+#	How often Zabbix will connect to VMware service to obtain a new data.
+#
+# Mandatory: no
+# Range: 10-86400
+# Default:
+# VMwareFrequency=60
+
+### Option: VMwarePerfFrequency
+#	How often Zabbix will connect to VMware service to obtain performance data.
+#
+# Mandatory: no
+# Range: 10-86400
+# Default:
+# VMwarePerfFrequency=60
+
+### Option: VMwareCacheSize
+#	Size of VMware cache, in bytes.
+#	Shared memory size for storing VMware data.
+#	Only used if VMware collectors are started.
+#
+# Mandatory: no
+# Range: 256K-2G
+# Default:
+# VMwareCacheSize=8M
+
+### Option: VMwareTimeout
+#	Specifies how many seconds vmware collector waits for response from VMware service.
+#
+# Mandatory: no
+# Range: 1-300
+# Default:
+# VMwareTimeout=10
+
+### Option: SNMPTrapperFile
+#	Temporary file used for passing data from SNMP trap daemon to the proxy.
+#	Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file.
+#
+# Mandatory: no
+# Default:
+# SNMPTrapperFile=/tmp/zabbix_traps.tmp
+
+### Option: StartSNMPTrapper
+#	If 1, SNMP trapper process is started.
+#
+# Mandatory: no
+# Range: 0-1
+# Default:
+# StartSNMPTrapper=0
+
+### Option: ListenIP
+#	List of comma delimited IP addresses that the trapper should listen on.
+#	Trapper will listen on all network interfaces if this parameter is missing.
+#
+# Mandatory: no
+# Default:
+# ListenIP=0.0.0.0
+
+### Option: HousekeepingFrequency
+#	How often Zabbix will perform housekeeping procedure (in hours).
+#	Housekeeping is removing outdated information from the database.
+#	To prevent Housekeeper from being overloaded, no more than 4 times HousekeepingFrequency
+#	hours of outdated information are deleted in one housekeeping cycle.
+#	To lower load on proxy startup housekeeping is postponed for 30 minutes after proxy start.
+#	With HousekeepingFrequency=0 the housekeeper can be only executed using the runtime control option.
+#	In this case the period of outdated information deleted in one housekeeping cycle is 4 times the
+#	period since the last housekeeping cycle, but not less than 4 hours and not greater than 4 days.
+#
+# Mandatory: no
+# Range: 0-24
+# Default:
+# HousekeepingFrequency=1
+
+### Option: CacheSize
+#	Size of configuration cache, in bytes.
+#	Shared memory size, for storing hosts and items data.
+#
+# Mandatory: no
+# Range: 128K-8G
+# Default:
+# CacheSize=8M
+
+### Option: StartDBSyncers
+#	Number of pre-forked instances of DB Syncers.
+#
+# Mandatory: no
+# Range: 1-100
+# Default:
+# StartDBSyncers=4
+
+### Option: HistoryCacheSize
+#	Size of history cache, in bytes.
+#	Shared memory size for storing history data.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# HistoryCacheSize=16M
+
+### Option: HistoryIndexCacheSize
+#	Size of history index cache, in bytes.
+#	Shared memory size for indexing history cache.
+#
+# Mandatory: no
+# Range: 128K-2G
+# Default:
+# HistoryIndexCacheSize=4M
+
+### Option: Timeout
+#	Specifies how long we wait for agent, SNMP device or external check (in seconds).
+#
+# Mandatory: no
+# Range: 1-30
+# Default:
+# Timeout=3
+
+Timeout=4
+
+### Option: TrapperTimeout
+#	Specifies how many seconds trapper may spend processing new data.
+#
+# Mandatory: no
+# Range: 1-300
+# Default:
+# TrapperTimeout=300
+
+### Option: UnreachablePeriod
+#	After how many seconds of unreachability treat a host as unavailable.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnreachablePeriod=45
+
+### Option: UnavailableDelay
+#	How often host is checked for availability during the unavailability period, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnavailableDelay=60
+
+### Option: UnreachableDelay
+#	How often host is checked for availability during the unreachability period, in seconds.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# UnreachableDelay=15
+
+### Option: ExternalScripts
+#	Full path to location of external scripts.
+#	Default depends on compilation options.
+#
+# Mandatory: no
+# Default:
+# ExternalScripts=${datadir}/zabbix/externalscripts
+
+### Option: FpingLocation
+#	Location of fping.
+#	Make sure that fping binary has root ownership and SUID flag set.
+#
+# Mandatory: no
+# Default:
+# FpingLocation=/usr/sbin/fping
+
+### Option: Fping6Location
+#	Location of fping6.
+#	Make sure that fping6 binary has root ownership and SUID flag set.
+#	Make empty if your fping utility is capable to process IPv6 addresses.
+#
+# Mandatory: no
+# Default:
+# Fping6Location=/usr/sbin/fping6
+
+### Option: SSHKeyLocation
+#	Location of public and private keys for SSH checks and actions.
+#
+# Mandatory: no
+# Default:
+# SSHKeyLocation=
+
+### Option: LogSlowQueries
+#	How long a database query may take before being logged (in milliseconds).
+#	Only works if DebugLevel set to 3 or 4.
+#	0 - don't log slow queries.
+#
+# Mandatory: no
+# Range: 1-3600000
+# Default:
+# LogSlowQueries=0
+
+LogSlowQueries=3000
+
+### Option: TmpDir
+#	Temporary directory.
+#
+# Mandatory: no
+# Default:
+# TmpDir=/tmp
+
+### Option: AllowRoot
+#	Allow the proxy to run as 'root'. If disabled and the proxy is started by 'root', the proxy
+#	will try to switch to the user specified by the User configuration option instead.
+#	Has no effect if started under a regular user.
+#	0 - do not allow
+#	1 - allow
+#
+# Mandatory: no
+# Default:
+# AllowRoot=0
+
+### Option: User
+#	Drop privileges to a specific, existing user on the system.
+#	Only has effect if run as 'root' and AllowRoot is disabled.
+#
+# Mandatory: no
+# Default:
+# User=zabbix
+
+### Option: Include
+#	You may include individual files or all files in a directory in the configuration file.
+#	Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
+#
+# Mandatory: no
+# Default:
+# Include=
+
+# Include=/usr/local/etc/zabbix_proxy.general.conf
+# Include=/usr/local/etc/zabbix_proxy.conf.d/
+# Include=/usr/local/etc/zabbix_proxy.conf.d/*.conf
+
+### Option: SSLCertLocation
+#	Location of SSL client certificates.
+#	This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLCertLocation=${datadir}/zabbix/ssl/certs
+
+### Option: SSLKeyLocation
+#	Location of private keys for SSL client certificates.
+#	This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLKeyLocation=${datadir}/zabbix/ssl/keys
+
+### Option: SSLCALocation
+#	Location of certificate authority (CA) files for SSL server certificate verification.
+#	If not set, system-wide directory will be used.
+#	This parameter is used only in web monitoring.
+#
+# Mandatory: no
+# Default:
+# SSLCALocation=
+
+####### LOADABLE MODULES #######
+
+### Option: LoadModulePath
+#	Full path to location of proxy modules.
+#	Default depends on compilation options.
+#
+# Mandatory: no
+# Default:
+# LoadModulePath=${libdir}/modules
+
+### Option: LoadModule
+#	Module to load at proxy startup. Modules are used to extend functionality of the proxy.
+#	Format: LoadModule=<module.so>
+#	The modules must be located in directory specified by LoadModulePath.
+#	It is allowed to include multiple LoadModule parameters.
+#
+# Mandatory: no
+# Default:
+# LoadModule=
+
+####### TLS-RELATED PARAMETERS #######
+
+### Option: TLSConnect
+#	How the proxy should connect to Zabbix server. Used for an active proxy, ignored on a passive proxy.
+#	Only one value can be specified:
+#		unencrypted - connect without encryption
+#		psk         - connect using TLS and a pre-shared key
+#		cert        - connect using TLS and a certificate
+#
+# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
+# Default:
+# TLSConnect=unencrypted
+
+### Option: TLSAccept
+#	What incoming connections to accept from Zabbix server. Used for a passive proxy, ignored on an active proxy.
+#	Multiple values can be specified, separated by comma:
+#		unencrypted - accept connections without encryption
+#		psk         - accept connections secured with TLS and a pre-shared key
+#		cert        - accept connections secured with TLS and a certificate
+#
+# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
+# Default:
+# TLSAccept=unencrypted
+
+### Option: TLSCAFile
+#	Full pathname of a file containing the top-level CA(s) certificates for
+#	peer certificate verification.
+#
+# Mandatory: no
+# Default:
+# TLSCAFile=
+
+### Option: TLSCRLFile
+#	Full pathname of a file containing revoked certificates.
+#
+# Mandatory: no
+# Default:
+# TLSCRLFile=
+
+### Option: TLSServerCertIssuer
+#      Allowed server certificate issuer.
+#
+# Mandatory: no
+# Default:
+# TLSServerCertIssuer=
+
+### Option: TLSServerCertSubject
+#      Allowed server certificate subject.
+#
+# Mandatory: no
+# Default:
+# TLSServerCertSubject=
+
+### Option: TLSCertFile
+#	Full pathname of a file containing the proxy certificate or certificate chain.
+#
+# Mandatory: no
+# Default:
+# TLSCertFile=
+
+### Option: TLSKeyFile
+#	Full pathname of a file containing the proxy private key.
+#
+# Mandatory: no
+# Default:
+# TLSKeyFile=
+
+### Option: TLSPSKIdentity
+#	Unique, case sensitive string used to identify the pre-shared key.
+#
+# Mandatory: no
+# Default:
+# TLSPSKIdentity=
+
+### Option: TLSPSKFile
+#	Full pathname of a file containing the pre-shared key.
+#
+# Mandatory: no
+# Default:
+# TLSPSKFile=