[dev-lang/php] bump to beta4

dev-lang/php/files/20php5-envd

@@ -0,0 +1,2 @@
+MANPATH="/usr/lib/php5/man/"
+CONFIG_PROTECT_MASK="/etc/php/cli-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/apache2-php5/ext-active/"

dev-lang/php/files/70_mod_php5.conf-apache2

@@ -0,0 +1,14 @@
+<IfDefine PHP5>
+	# Load the module first
+	<IfModule !mod_php5.c>
+		LoadModule php5_module    modules/libphp5.so
+	</IfModule>
+
+	# Set it to handle the files
+	<IfModule mod_mime.c>
+		AddHandler application/x-httpd-php .php .php5 .phtml
+		AddHandler application/x-httpd-php-source .phps
+	</IfModule>
+
+	DirectoryIndex index.php index.phtml
+</IfDefine>

dev-lang/php/files/php-fpm-r1.conf

@@ -0,0 +1,311 @@
+;;;;;;;;;;;;;;;;;;;;;
+; FPM Configuration ;
+;;;;;;;;;;;;;;;;;;;;;
+
+; All relative paths in this configuration file are relative to PHP's install
+; prefix (/usr/lib/php5.3). This prefix can be dynamicaly changed by using the
+; '-p' argument from the command line.
+
+; Include one or more files. If glob(3) exists, it is used to include a bunch of
+; files from a glob(3) pattern. This directive can be used everywhere in the
+; file.
+; Relative path can also be used. They will be prefixed by:
+;  - the global prefix if it's been set (-p arguement)
+;  - /usr/lib/php5.3 otherwise
+;include=/etc/php/fpm-php5.3/fpm.d/*.conf
+
+;;;;;;;;;;;;;;;;;;
+; Global Options ;
+;;;;;;;;;;;;;;;;;;
+
+[global]
+; Pid file
+; Note: the default prefix is /var/lib
+; Default Value: none
+; Warning: pid file is overriden by the Gentoo init script.
+; FPM will refuse to start if you uncomment this settingi and make use of the
+; init script. 
+; pid = /var/run/php-fpm.pid
+
+; Error log file
+; Note: the default prefix is /var/lib
+; Default Value: log/php-fpm.log
+error_log = /var/log/php-fpm.log
+
+; Log level
+; Possible Values: alert, error, warning, notice, debug
+; Default Value: notice
+;log_level = notice
+
+; If this number of child processes exit with SIGSEGV or SIGBUS within the time
+; interval set by emergency_restart_interval then FPM will restart. A value
+; of '0' means 'Off'.
+; Default Value: 0
+;emergency_restart_threshold = 0
+
+; Interval of time used by emergency_restart_interval to determine when 
+; a graceful restart will be initiated.  This can be useful to work around
+; accidental corruptions in an accelerator's shared memory.
+; Available Units: s(econds), m(inutes), h(ours), or d(ays)
+; Default Unit: seconds
+; Default Value: 0
+;emergency_restart_interval = 0
+
+; Time limit for child processes to wait for a reaction on signals from master.
+; Available units: s(econds), m(inutes), h(ours), or d(ays)
+; Default Unit: seconds
+; Default Value: 0
+;process_control_timeout = 0
+
+; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
+; Default Value: yes
+;daemonize = yes
+
+;;;;;;;;;;;;;;;;;;;;
+; Pool Definitions ; 
+;;;;;;;;;;;;;;;;;;;;
+
+; Multiple pools of child processes may be started with different listening
+; ports and different management options.  The name of the pool will be
+; used in logs and stats. There is no limitation on the number of pools which
+; FPM can handle. Your system will tell you anyway :)
+
+; Start a new pool named 'www'.
+; the variable $pool can we used in any directive and will be replaced by the
+; pool name ('www' here)
+[www]
+
+; Per pool prefix
+; It only applies on the following directives:
+; - 'slowlog'
+; - 'listen' (unixsocket)
+; - 'chroot'
+; - 'chdir'
+; - 'php_values'
+; - 'php_admin_values'
+; When not set, the global prefix (or /usr/lib/php5.3) applies instead.
+; Note: This directive can also be relative to the global prefix.
+; Default Value: none
+;prefix = /path/to/pools/$pool
+
+; The address on which to accept FastCGI requests.
+; Valid syntaxes are:
+;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
+;                            a specific port;
+;   'port'                 - to listen on a TCP socket to all addresses on a
+;                            specific port;
+;   '/path/to/unix/socket' - to listen on a unix socket.
+; Note: This value is mandatory.
+listen = 127.0.0.1:9000
+
+; Set listen(2) backlog. A value of '-1' means unlimited.
+; Default Value: 128 (-1 on FreeBSD and OpenBSD)
+;listen.backlog = -1
+ 
+; List of ipv4 addresses of FastCGI clients which are allowed to connect.
+; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
+; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
+; must be separated by a comma. If this value is left blank, connections will be
+; accepted from any ip address.
+; Default Value: any
+;listen.allowed_clients = 127.0.0.1
+
+; Set permissions for unix socket, if one is used. In Linux, read/write
+; permissions must be set in order to allow connections from a web server. Many
+; BSD-derived systems allow connections regardless of permissions. 
+; Default Values: user and group are set as the running user
+;                 mode is set to 0666
+;listen.owner = nobody
+;listen.group = nobody
+;listen.mode = 0666
+
+; Unix user/group of processes
+; Note: The user is mandatory. If the group is not set, the default user's group
+;       will be used.
+user = nobody
+group = nobody
+
+; Choose how the process manager will control the number of child processes.
+; Possible Values:
+;   static  - a fixed number (pm.max_children) of child processes;
+;   dynamic - the number of child processes are set dynamically based on the
+;             following directives:
+;             pm.max_children      - the maximum number of children that can
+;                                    be alive at the same time.
+;             pm.start_servers     - the number of children created on startup.
+;             pm.min_spare_servers - the minimum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is less than this
+;                                    number then some children will be created.
+;             pm.max_spare_servers - the maximum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is greater than this
+;                                    number then some children will be killed.
+; Note: This value is mandatory.
+pm = dynamic
+
+; The number of child processes to be created when pm is set to 'static' and the
+; maximum number of child processes to be created when pm is set to 'dynamic'.
+; This value sets the limit on the number of simultaneous requests that will be
+; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
+; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
+; CGI.
+; Note: Used when pm is set to either 'static' or 'dynamic'
+; Note: This value is mandatory.
+pm.max_children = 50
+
+; The number of child processes created on startup.
+; Note: Used only when pm is set to 'dynamic'
+; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
+;pm.start_servers = 20
+
+; The desired minimum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.min_spare_servers = 5
+
+; The desired maximum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.max_spare_servers = 35
+ 
+; The number of requests each child process should execute before respawning.
+; This can be useful to work around memory leaks in 3rd party libraries. For
+; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
+; Default Value: 0
+;pm.max_requests = 500
+
+; The URI to view the FPM status page. If this value is not set, no URI will be
+; recognized as a status page. By default, the status page shows the following
+; information:
+;   accepted conn        - the number of request accepted by the pool;
+;   pool                 - the name of the pool;
+;   process manager      - static or dynamic;
+;   idle processes       - the number of idle processes;
+;   active processes     - the number of active processes;
+;   total processes      - the number of idle + active processes.
+;   max children reached - number of times, the process limit has been reached,
+;                          when pm tries to start more children (works only for
+;                          pm 'dynamic')
+; The values of 'idle processes', 'active processes' and 'total processes' are
+; updated each second. The value of 'accepted conn' is updated in real time.
+; Example output:
+;   accepted conn:        12073
+;   pool:                 www
+;   process manager:      static
+;   idle processes:       35
+;   active processes:     65
+;   total processes:      100
+;   max children reached: 1
+; By default the status page output is formatted as text/plain. Passing either
+; 'html' or 'json' as a query string will return the corresponding output
+; syntax. Example:
+;   http://www.foo.bar/status
+;   http://www.foo.bar/status?json
+;   http://www.foo.bar/status?html
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may conflict with a real PHP file.
+; Default Value: not set 
+;pm.status_path = /status
+ 
+; The ping URI to call the monitoring page of FPM. If this value is not set, no
+; URI will be recognized as a ping page. This could be used to test from outside
+; that FPM is alive and responding, or to
+; - create a graph of FPM availability (rrd or such);
+; - remove a server from a group if it is not responding (load balancing);
+; - trigger alerts for the operating team (24/7).
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may conflict with a real PHP file.
+; Default Value: not set
+;ping.path = /ping
+
+; This directive may be used to customize the response of a ping request. The
+; response is formatted as text/plain with a 200 response code.
+; Default Value: pong
+;ping.response = pong
+ 
+; The timeout for serving a single request after which the worker process will
+; be killed. This option should be used when the 'max_execution_time' ini option
+; does not stop script execution for some reason. A value of '0' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_terminate_timeout = 0
+ 
+; The timeout for serving a single request after which a PHP backtrace will be
+; dumped to the 'slowlog' file. A value of '0s' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_slowlog_timeout = 0
+ 
+; The log file for slow requests
+; Default Value: not set
+; Note: slowlog is mandatory if request_slowlog_timeout is set
+;slowlog = /var/log/php-fpm-$pool.log.slow
+ 
+; Set open file descriptor rlimit.
+; Default Value: system defined value
+;rlimit_files = 1024
+ 
+; Set max core size rlimit.
+; Possible Values: 'unlimited' or an integer greater or equal to 0
+; Default Value: system defined value
+;rlimit_core = 0
+ 
+; Chroot to this directory at the start. This value must be defined as an
+; absolute path. When this value is not set, chroot is not used.
+; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
+; of its subdirectories. If the pool prefix is not set, the global prefix
+; will be used instead.
+; Note: chrooting is a great security feature and should be used whenever 
+;       possible. However, all PHP paths will be relative to the chroot
+;       (error_log, sessions.save_path, ...).
+; Default Value: not set
+;chroot = 
+ 
+; Chdir to this directory at the start.
+; Note: relative path can be used.
+; Default Value: current directory or / when chroot
+;chdir = /var/www
+ 
+; Redirect worker stdout and stderr into main error log. If not set, stdout and
+; stderr will be redirected to /dev/null according to FastCGI specs.
+; Note: on highloaded environement, this can cause some delay in the page
+; process time (several ms).
+; Default Value: no
+;catch_workers_output = yes
+ 
+; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
+; the current environment.
+; Default Value: clean env
+;env[HOSTNAME] = $HOSTNAME
+;env[PATH] = /usr/local/bin:/usr/bin:/bin
+;env[TMP] = /tmp
+;env[TMPDIR] = /tmp
+;env[TEMP] = /tmp
+
+; Additional php.ini defines, specific to this pool of workers. These settings
+; overwrite the values previously defined in the php.ini. The directives are the
+; same as the PHP SAPI:
+;   php_value/php_flag             - you can set classic ini defines which can
+;                                    be overwritten from PHP call 'ini_set'. 
+;   php_admin_value/php_admin_flag - these directives won't be overwritten by
+;                                     PHP call 'ini_set'
+; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
+
+; Defining 'extension' will load the corresponding shared extension from
+; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
+; overwrite previously defined php.ini values, but will append the new value
+; instead.
+
+; Note: path INI options can be relative and will be expanded with the prefix
+; (pool, global or /usr/lib/php5.3)
+
+; Default Value: nothing is defined by default except the values in php.ini and
+;                specified at startup with the -d argument
+;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
+;php_flag[display_errors] = off
+;php_admin_value[error_log] = /var/log/fpm-php.www.log
+;php_admin_flag[log_errors] = on
+;php_admin_value[memory_limit] = 32M

dev-lang/php/files/php-fpm-r4.init

@@ -0,0 +1,47 @@
+#!/sbin/runscript
+
+set_phpvars() {
+	PHPSLOT=${SVCNAME#php-fpm-}
+	[ ${PHPSLOT} = 'php-fpm' ] && PHPSLOT="$(eselect php show fpm)"
+
+	PHP_FPM_CONF="/etc/php/fpm-${PHPSLOT}/php-fpm.conf"
+	PHP_FPM_PID="/var/run/php-fpm-${PHPSLOT}.pid"
+}
+
+extra_commands="depend"
+extra_started_commands="reload"
+
+depend() {
+	need net
+	use apache2 lighttpd nginx
+}
+
+start() {
+        ebegin "Starting PHP FastCGI Process Manager"
+	set_phpvars
+        start-stop-daemon --start --pidfile ${PHP_FPM_PID} --exec \
+            /usr/lib/${PHPSLOT}/bin/php-fpm -- -y "${PHP_FPM_CONF}" -g "${PHP_FPM_PID}"
+        local i=0
+        local timeout=5
+        while [ ! -f ${PHP_FPM_PID} ] && [ $i -le $timeout ]; do
+            sleep 1
+            i=$(($i + 1))
+        done
+        
+        [ $timeout -gt $i ]
+        eend $?
+}
+
+stop() {
+        ebegin "Stopping PHP FastCGI Process Manager"
+	set_phpvars
+        start-stop-daemon --signal QUIT --stop --exec /usr/lib/${PHPSLOT}/bin/php-fpm --pidfile ${PHP_FPM_PID}
+        eend $?
+}
+
+reload() {
+    ebegin "Reloading PHP FastCGI Process Manager"
+    set_phpvars
+    [ -f ${PHP_FPM_PID} ] && kill -USR2 $(cat ${PHP_FPM_PID})
+    eend $?
+}

dev-lang/php/files/php-fpm_at-simple.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=The PHP FastCGI Process Manager
+After=network.target
+
+[Service]
+Type=simple
+PIDFile=/run/php-fpm/php-fpm-%I.pid
+ExecStart=/usr/libexec/php-fpm-launcher php%I -y /etc/php/fpm-php%I/php-fpm.conf --nodaemonize
+ExecReload=/bin/kill -USR2 $MAINPID
+PrivateTmp=true
+
+[Install]
+WantedBy=multi-user.target

dev-lang/php/files/php-fpm_at.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=The PHP FastCGI Process Manager
+After=network.target
+
+[Service]
+Type=notify
+PIDFile=/run/php-fpm/php-fpm-%I.pid
+ExecStart=/usr/libexec/php-fpm-launcher php%I -y /etc/php/fpm-php%I/php-fpm.conf --nodaemonize
+ExecReload=/bin/kill -USR2 $MAINPID
+PrivateTmp=true
+
+[Install]
+WantedBy=multi-user.target
+